# $Id: weewx.conf 2901 2015-02-05 21:15:03Z tkeffer $ # # WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2014 Tom Keffer # See the file LICENSE.txt for your full rights. ############################################################################## # This section is for general configuration information # Set to 1 for extra debug info, otherwise comment it out or set to zero. debug = 1 # Root directory of the weewx data file hierarchy for this station. WEEWX_ROOT = /home/mhoareau/Logiciels/weewx/home/ # How long to wait before timing out a socket (FTP, HTTP) connection: socket_timeout = 20 # Do not modify this - it is used by setup.py when installing and updating. version = 3.1.0 ############################################################################## [Station] # This section is for information about your station # Description of the station location. location = "Parc à Moutons, Saint-Joseph, La Réunion" # Latitude and longitude in decimal degrees latitude = -21.358647 longitude = 55.663398 # Altitude of the station, with unit it is in. This is downloaded from # from the station if the hardware supports it. altitude = 290, meter # Choose 'foot' or 'meter' for unit # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = Vantage # If you have a website, you may specify an URL #station_url = http://www.example.com # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 0 ############################################################################## [Vantage] # This section is for the Davis Vantage series of weather stations. # Connection type: serial or ethernet # serial (the classic VantagePro) # ethernet (the WeatherLinkIP) type = serial # If the connection type is serial, a port must be specified: # Debian, Ubuntu, Redhat, Fedora, and SuSE: # /dev/ttyUSB0 is a common USB port name # /dev/ttyS0 is a common serial port name # BSD: # /dev/cuaU0 is a common serial port name port = /dev/ttyUSB0 # If the connection type is ethernet, an IP Address/hostname is required: host = 1.2.3.4 ###################################################### # The rest of this section rarely needs any attention. # You can safely leave it "as is." ###################################################### # Serial baud rate (usually 19200) baudrate = 19200 # TCP port (when using the WeatherLinkIP) tcp_port = 22222 # TCP send delay (when using the WeatherLinkIP): tcp_send_delay = 1 # The id of your ISS station (usually 1) iss_id = 1 # How long to wait for a response from the station before giving up (in # seconds; must be greater than 2) timeout = 5 # How long to wait before trying again (in seconds) wait_before_retry = 1.2 # How many times to try before giving up: max_tries = 4 # The driver to use: driver = weewx.drivers.vantage ############################################################################## [StdRESTful] # This section is for uploading data to sites using RESTful protocols. [[StationRegistry]] # To register this weather station, set this to True: register_this_station = False [[AWEKAS]] # This section is for configuring posts to AWEKAS # If you wish to do this, uncomment the following username and password # lines and fill them with your username and password: #username = your AWEKAS username #password = your AWEKAS password [[CWOP]] # This section is for configuring posts to CWOP # If you wish to do this, make sure the following line is uncommented # and filled out with your station ID: #station = CW1234 # If you are an APRS (radio amateur) station, you will need a passcode: #passcode = your passcode here eg, 12345 (APRS stations only) [[PWSweather]] # This section is for configuring posts to PWSweather.com # If you wish to do this, uncomment the following station and password # lines and fill them with your station and password: #station = your PWSweather station ID (eg, KORHOODR3) #password = your PWSweather password [[WOW]] # This section is for configuring posts to WOW # If you wish to do this, uncomment the following station and password # lines and fill them with your station and password: #station = your WOW station ID #password = your WOW password [[Wunderground]] station = ISAINTPI63 password = REDACTED rapidfire = True log_success = False log_failure = True ############################################################################## [StdReport] # This section specifies what reports, using which skins, to generate. # Where the skins reside, relative to WEEWX_ROOT: SKIN_ROOT = skins # Where the generated reports should go, relative to WEEWX_ROOT: HTML_ROOT = public_html # The database binding indicates which data should be used in reports data_binding = wx_binding # Each subsection represents a report you wish to run. [[HTMLPages]] HTML_ROOT = public_html skin = Bootstrap [[BigImages]] HTML_ROOT = public_html/big_images skin = Images [[[ImageGenerator]]] bottom_label_font_size = 14 axis_label_font_size = 14 image_width = 900 top_label_font_size = 18 image_height = 600 anti_alias = 2 unit_label_font_size = 18 [[SmallImages]] HTML_ROOT = public_html/images skin = Images [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, uncomment and fill out the next four lines: #user = replace with your username #password = replace with your password #server = replace with your server name, e.g, www.threefools.org #path = replace with the destination directory (e.g., /weather) # Set to True for a secure FTP (SFTP) connection. Not all servers # support this: secure_ftp = False # If you wish to upload files from something other than what HTML_ROOT # is set to above, then reset it here: #HTML_ROOT = public_html # Most FTP servers use port 21, but if yours is different, you can # change it here port = 21 # Set to 1 to use passive mode, zero for active mode: passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs as to the user account on the remote machine where the files # will be copied. # # The following determine where files will be sent: server = 95.142.162.66 path = /srv/data/yableo/www/weather # (e.g., /weather) user = root #replace with your username # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 [[RSYNC2]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs as to the user account on the remote machine where the files # will be copied. # # The following determine where files will be sent: server = 95.142.162.66 path = /srv/data/meteor/stations/PAM290 # (e.g., /weather) user = root #replace with your username # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 ############################################################################## [StdConvert] # This service acts as a filter, converting the unit system coming from # the hardware to a unit system in the database. # # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## [StdCalibrate] # This section can adjust data using calibration expressions. [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # For example: # outTemp = outTemp - 0.2 ############################################################################## [StdQC] # This section is for quality control checks. If units are not specified, # values must be in the units defined in the StdConvert section. [[MinMax]] barometer = 26, 32.5, inHg outTemp = -40, 120, degree_F inTemp = 10, 120, degree_F outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, mile_per_hour ############################################################################## [StdWXCalculate] # Derived quantities are calculated by this service. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware barometer = prefer_hardware altimeter = prefer_hardware windchill = prefer_hardware heatindex = prefer_hardware dewpoint = prefer_hardware inDewpoint = prefer_hardware rainRate = prefer_hardware ############################################################################## [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 14400 # How much it can drift before we will correct it (in seconds) max_drift = 5 ############################################################################## [StdArchive] # This section is for configuring the archive service. # If your station hardware supports data logging then the archive interval # will be downloaded from the station. # Otherwise, you must specify it below (in seconds): archive_interval = 300 # How long to wait (in seconds) before processing new archive data. Must # be greater than zero. archive_delay = 15 # Generally, if possible, new records are downloaded from the console # hardware. If the console does not support this, then software record # generation is done. # Set the following to "software" to force software record generation: record_generation = hardware # Whether to include LOOP data in hi/low statistics. loop_hilo = True # The data binding to be used: data_binding = wx_binding ############################################################################## [DataBindings] # This section binds a data store to a database [[wx_binding]] # The database must match one of the sections in [Databases] database = archive_sqlite # The name of the table within the database table_name = archive # The manager handles aggregation of data for historical summaries manager = weewx.wxmanager.WXDaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview.schema [Databases] # This section defines the actual databases # A SQLite database is simply a single file [[archive_sqlite]] root = %(WEEWX_ROOT)s database_name = archive/weewx.sdb driver = weedb.sqlite # MySQL require a server (host) with name and password for access [[archive_mysql]] host = localhost user = weewx password = REDACTED database_name = weewx driver = weedb.mysql ############################################################################## [Engine] # This section configures the engine. [[Services]] # These are the services the engine should run: prep_services = weewx.engine.StdTimeSynch, data_services = , process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate archive_services = weewx.engine.StdArchive, restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS report_services = weewx.engine.StdPrint, weewx.engine.StdReport